Industrial Rod Mills for Mineral ore and Construction Material
A rod mill uses steel rods as the grinding media in tumbling mills is an efficient means to feed rod mills a product finer than could be made in a crusher but coarser than could be made in a ball mill. So Rod mills are very similar to ball mills, except they use long rods for grinding media. The rods grind the ore by tumbling within the the mill, similar to the grinding balls in a ball mill. To prevent the conditions leading to rod charge tangling, the length to diameter ratio is maintained at 1.2 to 3.6m.
Rod mills are widely applied in cement industry, chemical industry, new building materials, fire-resistant materials, fertilizer, porcelain and glass industry etc.
Rod Mill Working Princple:
Rod mills run along the outside gear. Materials spirally and evenly enter the crushing chamber along the input hollow axis by input devices. Steel rods of different specifications are installed in the crushing chamber. When the frame rotates, centrifugal force is produced. At the same time, the steel rods are carried to some height and then fall to grind and strike the material. After grinded in the crushing chamber, the powder is discharges by output material board.
The Rod mills are horizontal cylindrical rotation device, driven by brim gearwheel. There are two chambers and grid. Material goes into the first chamber through the feeding inlet. Inside the first chamber, there are stage liners and ripple liners as well as steel balls. The shell rotates so as to generate electricity, and this force brings ball to a certain height and then balls drop down by gravity, the impact is the grinding force to the material. After the primary grinding, materials go into the second chamber through segregate screen. In the second chamber, there are flat liners and steel ball, after the secondary grinding, material is discharged from the discharging. Then the whole grinding process end.
Rod Mill Technical Details:
| Model No. | Size of Drum
Dia x Length(mm) | Capacity (t/h) | Drum
(R.P.M) | Motor
(kw) | Rod Charge
(ton) |
Feed 25mm
Prod. 20 mesh | Feed 25mm
Prod. 35 mesh | Feed 25mm
Prod. 65 mesh |
| HRO924 | 900 × 2,400 | 3.55 | 2.85 | 1.8 | 22 | 22 | 2 |
| HRO1224 | 1,200 × 2,400 | 7.2 | 5.75 | 3.6 | 22 | 55 | 5.6 |
| HRO1230 | 1,200 × 3,000 | 8.75 | 7 | 4.4 | 27 | 55 | 6.6 |
| HRO1530 | 1,500 × 3,000 | 14.6 | 11.7 | 7.3 | 24 | 95 | 11 |
| HRO1536 | 1,500 × 3,600 | 17.5 | 14 | 8.75 | 24 | 110 | 13 |
| HRO1830 | 1,800 × 3,000 | 21.2 | 17 | 10.6 | 21 | 150 | 16 |
| HRO1836 | 1,800 × 3,600 | 25.6 | 20.5 | 12.8 | 21 | 150 | 19 |
| HRO2460 | 2,400 × 6,000 | 36 | 29.4 | 18.3 | 19.5 | 220 | 27 |
Product Tags:
|
|
2 Ton 22KW 900 × 2400mm Mineral Ore Rod Mill Crusher Images
|
